Pengaruh Lingkungan Kerja Terhadap Kinerja Karyawan Pada Operator Departemen Dyeing and Finishing PT X Majalaya
DOI:
https://doi.org/10.35870/emt.v10i3.6963Keywords:
Work Environment, Employee Performance, Textile Industry, Production OperatorsAbstract
This study seeks to examine and evaluate the work environment conditions and their impact on the performance of employees working as operators in the Dyeing and Finishing Department at PT X Majalaya. This research employs a quantitative method with descriptive and associative approaches. Data were collected through observation, unstructured interviews, and the distribution of questionnaires to the research respondents. The population of this study consists of operators in the Dyeing and Finishing Department of PT X Majalaya. The sampling technique used was simple random sampling, resulting in 66 respondents as the research sample. Data analysis was conducted using simple linear regression, significance testing (t-test), and the coefficient of determination. The results indicate that the work environment has a positive and significant effect on employee performance among operators in the Dyeing and Finishing Department of PT X Majalaya. These findings explain that a supportive work environment can encourage improvements in employee performance in carrying out their duties and responsibilities in the workplace.
Downloads
References
Adhari, I. Z. (2021). Optimalisasi kinerja karyawan menggunakan pendekatan knowledge management & motivasi kerja. Pasuruan: CV. Penerbit Qiara Media.
Agustina, S., Fachrudin, D. H., & Suntoro, S. (2023). PENGARUH SIKAP KERJA DAN LINGKUNGAN KERJA TERHADAP PERILAKU KESELAMATAN OPERATOR PRODUKSI YANG BERDAMPAK PADA KESELAMATAN KERJA (Studi Kasus: PT Ayoe Indotama Textile, Kota Cimahi)(TA. 16.19. 23.68) (Doctoral dissertation, Perpustakaan Ulbi).
Anggraeni, N. (2024). PENGARUH DISIPLIN KERJA DAN LINGKUNGAN KERJA TERHADAP KINERJA KARYAWAN PADA PT DEA WARNA ABADI (Doctoral dissertation, UPN" Veteran" Jawa Timur).
Bakker, A. B., & Demerouti, E. (2007). The Job Demands–Resources model: State of the art. Journal of Managerial Psychology, 22(3), 309–328.
Ghozali, I. (2021). Aplikasi analisis multivariate dengan program IBM SPSS 26. Semarang: Badan Penerbit Universitas Diponegoro.
Hasibuan, M. S. (2017). Manajemen sumber daya manusia. Jakarta: Bumi Aksara.
International Labour Organization. (2019). Working on a warmer planet: The impact of heat stress on labour productivity and decent work. Geneva: ILO.
Ristandi, A. (2024). USULAN PENINGKATAN KUALITAS PADA PEMBUATAN KAIN DENGAN METODE DMAIC DAN PDCA DI DEPARTEMEN DYEING PT. INDONESIA SYNTHETIC TEXTILE MILLS (Doctoral dissertation, KODEUNIVERSITAS041060# UniversitasBuddhiDharma).
Rizky, D. M., Utami, I. W., & Waluyo, G. F. (2023). ANALISIS BEBAN KERJA FISIK KARYAWAN DIVISI GARMENT PADA DEPARTEMEN SEWING PT. DAN LIRIS MENGGUNAKAN METODE FULL TIME EQUIVALENT (FTE). Journal of Research and Technology Studies, 2(2), 79-88.
Rofinky, H. (2022). Pengaruh Beban Kerja dan Lingkungan Kerja Terhadap Kinerja Karyawan Melalui Stres Kerja Sebagai Variabel Intervening Pada Karyawan PT. Sukorejo Indah Textile (Sukorintex) Batang (Doctoral dissertation, Institut Agama Islam Negeri Pekalongan).
Sedarmayanti. (2017). Perencanaan dan pengembangan sumber daya manusia untuk meningkatkan kompetensi, kinerja, dan produktivitas kerja. Bandung: PT Refika Aditama.
Sihombing, M. I. S., & Sumartini, S. (2017). Pengaruh Pengendalian Kualitas Bahan Baku dan Pengendalian Kualitas Proses Produksi terhadap Kuantitas Produk Cacat dan Dampaknya pada Biaya Kualitas (Cost of Quality). Jurnal Ilmu Manajemen Dan Bisnis, 8(2), 42-49. https://doi.org/10.17509/jimb.v8i2.12665.
Sugiyono. (2018). Metode penelitian kuantitatif, kualitatif, dan R&D (Edisi terbaru). Bandung: Alfabeta.
Trihantoro, A. (2022). Pengaruh lingkungan kerja terhadap kinerja karyawan pada perusahaan manufaktur. Universitas Negeri Yogyakarta, Yogyakarta.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jihan Syairaa Paras Putri Ayudhiya, Iwan Sukoco, Ratna Meisa Dai
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.
