Published: 2020-12-30
Analisis Efisiensi Teknis Industri Perabot di Kecamatan Jeumpa Kabupaten Bireuen dengan Data Envelopment Analysis (DEA) Method
DOI: 10.35870/emt.v4i2.160
Abstract
This study aims to determine the technical efficiency of input use (investment value, raw material value and labor cost) on the output (production value) of the furniture industry in Jeumpa sub-district, Bireuen Regency. The sample used is 53 industrial units which are all furniture industry units in Jeumpa District, Bireuen Regency. The data analysis method uses the Data Envelopment Analysis (DEA) analysis tool with the VRS approach. The results showed that only 30 units of furniture industry in Jeumpa District were efficient in using input, while 23 other industrial units had not been able to achieve efficiency in input use.
Keywords
production value; investment costs; raw material costs; labor costs; DEA
Article Information
This article has been peer-reviewed and published in the Jurnal EMT KITA. The content is available under the terms of the Creative Commons Attribution 4.0 International License.
-
Issue: Vol. 4 No. 2 (2020)
-
Section: Articles
-
Published: 2020-12-30
-
License: CC BY 4.0
-
Copyright: © 2020 Authors
-
DOI: 10.35870/emt.v4i2.160
AI Research Hub
This article is indexed and available through various AI-powered research tools and citation platforms. Our AI Research Hub ensures that scholarly work is discoverable, accessible, and easily integrated into the global research ecosystem.
No author biographies available.
-
Bilas, Richard A (2018), Teori Mikro Ekonomi.Erlangga: Jakarta.
-
Gujarati dan porter (2019), Dasar-dasar Ekonomitrika. Salemba Empat. Jakarta
-
Sugiyono (2019), Metode Penelitian Kuantitatif, Kualitatif, Bandung Alfabeta.
-
Simajuntak, Payaman J (2013), Produktivitas Kerja Pengertian dan Ruang Lingkupnya, Prisma. Jakarta.
-
Sumarsono, Sony (2013), Ekonomi Sumber Daya Manusia dan Ketenagakerjaan. Yogyakarta, Graha Ilmu.
-
IKomang Suartawan, I.B Purbadharmaja (2019), Pengaruh Modal dan Bahan Baku Terhadap Pendapatan Melalui Produksi Pengrajin Patumg Kayu di Kecamatan Sukasakti Kabupaten Gianyar. E-Jurnal Ekonomi Pembangunan Universitas Udayana. Vol. 6. No. 9.
-
Maryati, Riski (2015), Analisis Produksi Industri Funiture dan Kayu di Kota Pekanbaru. E-jurnal Fakultas Ekonomi Vol.2. No 2.
-
Putra, Eka, Riky (2012), Pengaruh Nilai Investasi Nilai Upah dan Nilai Produksi Terhadap Penyerapan Tenaga Kerja pada Industri Mebel di Kecamatan Ped Anonymous. (2012). Green Education Centre. http:// budidaya-sorgum.html Diakses tanggal 30 Juni 2012.
-
Respikasari., T, Ekowati., dan A, Setiadi. (2014). Analisis Efisiensi Ekonomi Penggunaan Faktor-Faktor Produksi Usahatani Padi Sawah di Kabupaten Karanganyar. J. Agribisnis dan Agrowisata 5 (1) : 1-11.
-
Perdana, Adie, Herry, Gede (2017), Pengaruh Modal Tingkat Upah Penyerapan Tenaga Kerja Terhadap Produksi kerajinan Patung Padas Kecamatan Sukawati. E-jurnal Ekonomi Pembangunan Udayana.Vol.6. No 7.
-
Supriyanto (2015), Pengaruh Jumlah Tenaga Kerja dan Jumlah Modal Terhadap Pendapatan Home Industri Daur Ulang di Desa Seketi. Jurnal Trisuha LP2M Undar. Edisi 2 Vol. 2.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.