Rancang Bangun Internet of Things (IoT) Pengaturan Kelembaban Tanah untuk Tanaman Berbasis Mikrokontroler
DOI:
https://doi.org/10.35870/jtik.v5i2.211Keywords:
Automatic Watering, ESP8266, Soil Moisture SensorAbstract
Soil moisture is needed in rice fields for plant growth, with attention to soil moisture in rice fields, it can increase fertility in the land which impacts existing plants. But in regulating soil moisture requires a level that is following the existing plants, because each plant has different humidity settings. This research will design a tool to adjust soil moisture in rice fields automatically to maintain soil moisture according to plant needs. This tool is designed to use a Soil Moisture sensor which can later be used as input data to the ESP8266 to drive a Servo Motor as a soil moisture regulator, a Servo Motor as an irrigation door drive. In making the design of irrigation arrangements, moisture data from each plant is needed because each plant has a different moisture content, from the results of the study, it was found that the soil moisture of kale plants was ± 49% - 68%, and soil moisture of corn plants ± 48% - 63%.
Downloads
References
Ardiansah, I., Putri, S.H., Wibawa, A.Y. and Rahmah, D.M., 2018. Optimalisasi Ketersediaan Air Tanaman dengan Sistem Otomasi Irigasi Tetes Berbasis Arduino Uno dan Nilai Kelembaban Tanah. Ultimatics: Jurnal Teknik Informatika, 10(2), pp.78-84.
Pramudita, D. and Agus Ulinuha, S.T., 2017. Protoype Sistem Buka Tutup Pintu Air Otomatis pada Persawahan Berbasis Arduino Uno (Doctoral dissertation, Universitas Muhammadiyah Surakarta).
Chaer, M.S.I., Abdullah, S.H. and Priyati, A., 2016. Aplikasi Mikrokontroler Arduino Pada Sistem Irigasi Tetes Untuk Tanaman Sawi (Brassica Juncea) (Application of Arduino Microcontroller on Drip Irrigation for Mustard Plant (Brassica juncea). Jurnal Ilmiah Rekayasa Pertanian dan Biosistem, 4(2), pp.228-238.
PVS, D.D., Pachiyannan, M. and Pravallika, G., 2019, March. A Low-Cost Arduino based Automatic Irrigation System using Soil Moisture Sensor: Design and Analysis. In 2019 2nd International Conference on Signal Processing and Communication (ICSPC) (pp. 104-108). IEEE.
Ma'arif, R.A., Fauziah, F. and Hayati, N., 2020. Sistem Monitoring Tempat Sampah Pintar Secara Real-time Menggunakan Metode Fuzzy Logic Berbasis IOT. Jurnal Infomedia: Teknik Informatika, Multimedia & Jaringan, 4(2), pp.69-74.
Maulana, P., Darusalam, U. and Nathasia, N.D., 2020. Road Guides and Special Location Monitoring for Blind People Using Ultrasonic Sensors and Microcontroller-Based GPS Modules. Jurnal Mantik, 3(4, Feb), pp.444-450.
Taneja, K. and Bhatia, S., 2017, June. Automatic irrigation system using Arduino UNO. In 2017 International Conference on Intelligent Computing and Control Systems (ICICCS) (pp. 132-135). IEEE.
Alel, C.D. and Aswardi, A., 2020. Rancang Bangun Buka Tutup Pintu Air Otomatis Pada Irigasi Sawah Berbasis Arduino Dan Monitoring Menggunakan Android. JTEV (Jurnal Teknik Elektro dan Vokasional), 6(1), pp.167-178.
Kamaruddin, F., Abd Malik, N.N.N., Murad, N.A., Latiff, N.M.A.A., Yusof, S.K.S. and Hamzah, S.A., 2019. IoT-based intelligent irrigation management and monitoring system using arduino. Telkomnika, 17(5), pp.2378-2388.
Benyezza, H., Bouhedda, M., Djellout, K. and Saidi, A., 2018, November. Smart irrigation system based ThingSpeak and Arduino. In 2018 International Conference on Applied Smart Systems (ICASS) (pp. 1-4). IEEE.
Lutfiyana, L., Hudallah, N. and Suryanto, A., 2017. Rancang bangun alat ukur suhu tanah, kelembaban tanah, dan resistansi. Jurnal Teknik Elektro, 9(2), pp.80-86.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.
