Upaya Meminimumkan Biaya Pemeliharaan Mesin dengan Metode Preventive dan Breakdown Maintenance pada Workshop Arita Steel Medan

Authors

DOI:

https://doi.org/10.35870/jemsi.v7i2.612

Keywords:

Pemeliharaan Preventive, Pemeliharaan Breakdown, Pemeliharaan Mesin, Pemeliharaan

Abstract

Penelitian yang dilakukan bertujuan untuk menganalisis perawatan Arita Steel bengkel yang diaplikasikan pada mesin cetak mirror merk Sumitomo TP41 buatan Jepang. Periksa kedalaman pemeliharaan preventif dan pemeliharaan jika terjadi kegagalan sistem pemeliharaan yang diterapkan. Ini juga mengidentifikasi perbandingan yang paling efektif untuk meminimalkan biaya pemeliharaan antara biaya pencegahan dan biaya waktu henti. Jenis penelitian deskriptif. Teknologi perolehan data yang digunakan adalah wawancara, observasi dan dokumentasi. Ada 45 mesin berdasarkan data dari Workshop Ariita Steel, dan satu tahun masalah memiliki 30 mesin. Untuk meminimalkan biaya dan mengurangi kerusakan mesin, peneliti membandingkan kedua metode ini dan menemukan bahwa pedoman pencegahan lebih efektif daripada kebijakan runtuh. Mesin Rp. 31.630.769.23. Hasil penelitian ini menunjukkan bahwa status pemeliharaan perusahaan dapat mengkonfirmasi keadaan mesin yang dianalisis secara signifikan. Biaya pemeliharaan perusahaan sebesar RP. 122.163.077 per bulan.

Downloads

Download data is not yet available.

Author Biographies

  • Masri ALI, Syiah Kuala University

    Jurusan Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Kota Banda Aceh, Provinsi Aceh, Indonesia

  • ARHAMI, Syiah Kuala University

    Jurusan Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Kota Banda Aceh, Provinsi Aceh, Indonesia

References

Alatas, S. H. (2013). The Myth of the Lazy Native: A Study of the Image of the Malays, Filipinos and Javanese from the 16th to the 20th Century and Its Function in the Ideology of Colonial Capitalism. Routledge.

Assauri, S. (2008). Manajemen produksi dan operasi.

Cudney, E. A., & Agustiady, T. K. (2016). Design for six sigma: a practical approach through innovation. CRC Press.

Hasibuan, M. S. (2007). Manajemen: dasar, pengertian, dan masalah, Edisi Revisi, Jakarta; Bumi Aksara

Heizer, J., Render, B., Munson, C., & Sachan, A. (2017). Operations management: sustainability and supply chain management, 12/e. Pearson Education.

Rastogi, M. K. (2010). Production and operation management. Laxmi Publications, Ltd.

Rayna, T., & Striukova, L. (2016). From rapid prototyping to home fabrication: How 3D printing is changing business model innovation. Technological Forecasting and Social Change, 102, 214-224.

Syamsudin , Damiayanti, (2011), Metode Penelitian Pendidikan Bahasa. Bandung; PT. Remaja Rosdakarya

Tampubolon, M. P. (2004). Manajemen operasional. Jakarta: Ghalia Indonesia.

Downloads

Published

2021-12-30

Issue

Vol. 7 No. 2 (2021): JEMSI (JURNAL EKONOMI, MANAJEMEN, DAN AKUNTANSI)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish with this journal agree to the following terms:

1. Copyright Retention and Open Access License

Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).

This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

2. Rights Granted Under CC BY 4.0

Under this license, readers are free to:

  • Share — copy and redistribute the material in any medium or format
  • Adapt — remix, transform, and build upon the material for any purpose, including commercial use
  • No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed

3. Attribution Requirements

All uses must include:

  • Proper citation of the original work
  • Link to the Creative Commons license
  • Indication if changes were made to the original work
  • No suggestion that the licensor endorses the user or their use

4. Additional Distribution Rights

Authors may:

  • Deposit the published version in institutional repositories
  • Share through academic social networks
  • Include in books, monographs, or other publications
  • Post on personal or institutional websites

Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.

5. Self-Archiving and Pre-Print Sharing

Authors are encouraged to:

  • Share pre-prints and post-prints online
  • Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
  • Engage in scholarly communication throughout the publication process

6. Open Access Commitment

This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.

How to Cite

ALI, M., & ARHAMI. (2021). Upaya Meminimumkan Biaya Pemeliharaan Mesin dengan Metode Preventive dan Breakdown Maintenance pada Workshop Arita Steel Medan. JEMSI (Jurnal Ekonomi, Manajemen, Dan Akuntansi), 7(2), 94-97. https://doi.org/10.35870/jemsi.v7i2.612