Workshop Pelatihan Simulasi Wokwi dan Implementasi Modul Starter IoT untuk Meningkatkan Kompetensi Siswa SMK NADA
DOI:
https://doi.org/10.35870/jpmn.v6i1.6657Keywords:
Microcontroller, IoT, Technology, Vocational High School, TrainingAbstract
SMK Nasional Dawarblandong (SMK NADA) is a vocational school that focuses on developing technological skills; however, it still faces limitations in practical learning facilities, particularly in the field of Internet of Things (IoT). Preliminary observations showed that 78% of students had never used microcontroller devices and 85% had never used IoT simulation platforms such as Wokwi. This condition contributes to low levels of technical competence among students, while industry demand for IoT-related skills continues to increase. This community service program aimed to improve students' competencies through a training workshop on Wokwi simulation and the implementation of an IoT starter module using Arduino and ESP32. The training applied a participatory learning approach consisting of theoretical explanation, simulation practice, case studies, and direct hardware implementation. The evaluation was conducted using pre-test, post-test, and participant satisfaction questionnaires. The results indicated a significant improvement in students’ understanding of IoT concepts and automation systems. Questionnaire analysis showed that 36% of participants rated the clarity of tutor explanations with the highest score (score 5), indicating excellent communication effectiveness during training. Overall, the training successfully improved students' knowledge and practical skills in IoT simulation and microcontroller-based automation systems.
Downloads
References
Afrin, S., Rafa, S. J., Kabir, M., Farah, T., Alam, M. S. B., Lameesa, A., ... & Gandomi, A. H. (2025). Industrial Internet of Things: Implementations, challenges, and potential solutions across various industries. Computers in Industry, 170. https://doi.org/10.1016/j.compind.2025.104317
Akbar, Junaidi, Jacob Febryadi Nithanel Dethan, Rudy Arijanto, Benny Daniawan, Andi Leo, and Universitas Buddhi Dharma. (2024). Implementasi Internet of Things (IoT) dalam Pelatihan Siswa Multimedia SMK Setia Bhakti. Jurnal Abdimas Berdaya.7(1):55–62. https://doi.org/10.30736/jab.v7i1.608
Astutik, R. P., Winarno, H. A., Eliyani, E., Irawan, D., Arifian, R. Y. P., Utomo, M. F. P., & Perdana, A. T. H. (2021). The arduino SCADA training at the Mambaul Ulum Vocational High School, Gresik. Community Empowerment, 6(9), 1728-1733. https://doi.org/10.31603/ce.5827
Astutik, R. P., Winarno, H. A., Irawan, D., Triyoga, W., & Fibiani, N. K. (2022). Pembelajaran Modul SCADA Menggunakan Arduino untuk SMK Muhammadiyah 1 Gresik. Jurnal Abdi Masyarakat Indonesia, 2(4), 1377–1384. https://doi.org/10.54082/jamsi.434
Astutik, R. P., Winarno, H. A., Prastya, E. P., Maulana, I., Hidayah, A., Umam, Z., ... & Rahmadhany, N. W. (2023). Pelatihan Outseal-Haiwell Pada SMK Semen Gresik. J-ADIMAS (Jurnal Pengabdian Kepada Masyarakat), 11(1), 14-18. https://doi.org/10.29100/j-adimas.v11i1.3626
Basirung, M. R. (2024). The The Development of IoT–based Microcontroller Media for Industrial Program 4.0 at Vocational Secondary School . (2024). Jurnal Teknodik. https://doi.org/10.32550/teknodik.vi.1084
Denny Irawan, Rini Puji Astutik, Eka Putra Prastya, & Alief Hidayah. (2023). Pelatihan Outseal-Haiwell for PLC and SCADA di SMKN 1 Singosari, Malang. Nusantara: Jurnal Pengabdian Kepada Masyarakat, 3(2), 240–248. https://doi.org/10.55606/nusantara.v3i2.1675
Gunawan, B., Hamdani, D., Setiawan, I., & Lora, H. A. (2025). Arduino Training for High School Students: Improving Technology Literacy and Creativity in the Digital Age. Aktual: Jurnal Pengabdian Kepada Masyarakat, 3(3), 141–148. https://doi.org/10.58723/aktual.v3i3.476
Handoko, A. K. T., Sutopo, Y., & Sukamta, S. (2026). Development of an STM32 Microcontroller Training Kit for Project Based Learning in Microcontroller Application Programming to Improve Vocational Student Understanding of Microcontroller Programming. Journal of Vocational and Career Education, 11(1). https://doi.org/10.15294/jvce.v11i1.40830
Hasan, D. (2025). Iot-based smart education: A systematic review of the state of the art. Journal of Intelligent Systems and Information Technology, 2(1), 1-16. https://doi.org/10.61971/jisit.v2i1.106
Kumar, K., & Al-Besher, A. (2022). IoT enabled e-learning system for higher education. Measurement: Sensors, 24. https://doi.org/10.1016/j.measen.2022.100480
Lararenjana, E. 2020. “4 Tujuan MEA Atau Masyarakat Ekonomi ASEAN, Pasar Tunggal Di Regional Asia Tenggara Halaman 2 | Merdeka.Com.” Retrieved September 17, 2021 (https://www.merdeka.com/jatim/4-tujuan-mea-atau-masyarakat-ekonomi-asean-pasar-tunggal-di-regional-asia-tenggara-kln.html?page=2).
N. A. Suwastika, M. Masrom and Q. Qonita, "IoT Application in Indonesian Vocational Schools as Learning Media and Learning Support Infrastructure: A Systematic Review," 2023 9th International Conference on Education and Technology (ICET), Malang, Indonesia, 2023, pp. 1-7, doi: 10.1109/ICET59790.2023.10435272.
Nugroho, A. W., Yudha, F. A. K., Suwanda, T., Kurniawan, A., & Ardiyansyah, N. (2023, December). Improving the IT Competence of Vocational High School Teachers with Internet of Things Training Based on ESP 8266. In Proceeding International Conference of Community Service (Vol. 1, No. 2). https://doi.org/10.18196/iccs.v1i2.110
Prasetyo Tulodo, R., Indah Fitria, R., Sofyan, A., & Budiraharjo, E. (2024). Penggunaan Simulator Wokwi untuk Meningkatkan Literasi Pemrograman Mikrokontroler dalam Proyek Internet Of Things. EDUSAINTEK: Jurnal Pendidikan, Sains Dan Teknologi, 12(1), 72 - 81. https://doi.org/10.47668/edusaintek.v12i1.1442
Suwastika, N. A., Masrom, M., Qonita, Q., & Anwar , M. . (2025). IoT Readiness Model for Urban Vocational School: Case Study in Indonesia. Qubahan Academic Journal, 5(1), 674–702. https://doi.org/10.48161/qaj.v5n1a1534
Wara, D., & Suprianto, B. (2021). Pengembangan Trainer Internet of Things Berbasis Mikrokontroler ESP32 Pada Mata Pelajaran Pemrograman, Mikroprosesor dan Mikrokontroler di SMK Negeri 2 Surabaya. Jurnal Pendidikan Teknik Elektro, 10(02), 103–112. https://doi.org/10.26740/jpte.v10n02.p103-112
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Rini Puji Astutik, Denny Irawan, Arbi Alfian Mas'ud, Muhammad Ramadhani, Samsudin Nur
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.
