Published: 2022-01-03
Monitoring Sistem Keamanan Laci Kasir Dengan Fingerprint Berbasis Android
DOI: 10.35870/jtik.v6i3.426
Ahmad Muslih Mardia, Iskandar Fitri, Sari Ningsih
-
Ahmad Muslih Mardia:
Nasional University
-
Iskandar Fitri:
Nasional University
-
Sari Ningsih:
Nasional University
Abstract
Internet of Things is becoming one of the trends in the world of technology. One of the uses of technology like this can be found in maintaining the security of a store. In this study, the mechanical cash register drawer lock will be replaced with fingerprint biometric recognition technology that exists in smart phones. Use of Solenoid doorlock as a substitute for cashier drawer locks. The fingerprint will be verified by the application to be matched with the database, then send data to the NodeMCU microcontroller which is integrated with smart phone devices as monitoring. The data will be sent to the database and read by the application system on the smart phone device to be accessed anywhere. Solenoid doorlock instead of drawer lock. If the fingerprint successfully verifies the fingerprint and matches the data in the system, the cashier drawer lock will open.
Keywords
Fingerprint; Selenoid Doorlock; Cashier Locker; Android; Monitoring
Article Information
This article has been peer-reviewed and published in the Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi). The content is available under the terms of the Creative Commons Attribution 4.0 International License.
-
Issue: Vol. 6 No. 3 (2022)
-
Section: Computer & Communication Science
-
Published: 2022-01-03
-
License: CC BY 4.0
-
Copyright: © 2022 Authors
-
DOI: 10.35870/jtik.v6i3.426
AI Research Hub
This article is indexed and available through various AI-powered research tools and citation platforms. Our AI Research Hub ensures that scholarly work is discoverable, accessible, and easily integrated into the global research ecosystem.
Ahmad Muslih Mardia, Nasional University
Iskandar Fitri, Nasional University
Sari Ningsih, Nasional University
-
Raudiah, M. and Elfizon, E., 2020. Perancangan Keamanan Brangkas Berbasis Arduino dan Android. JTEIN: Jurnal Teknik Elektro Indonesia, 1(2), pp.246-250.
-
Herlan, A., Fitri, I. and Nuraini, R., 2021. Rancang Bangun Sistem Monitoring Data Sebaran Covid-19 Secara Real-Time menggunakan Arduino Berbasis Internet of Things (IoT). Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi), 5(2), pp.206-212.
-
Hartawan, I.N.B. and Sudiarsa, I.W., 2019. Analisis kinerja internet of things berbasis firebase real-time Database. Jurnal RESISTOR (Rekayasa Sistem Komputer), 2(1), pp.6-17.
-
Muhajirin, M. and Lisah, L., 2017. Sistem keamanan pintu berbasis arduino mega. Jurnal Informatika Upgris, 3(2).
-
Handoko, P., 2017. Sistem Kendali Perangkat Elektronika Monolitik Berbasis Arduino Uno R3. Prosiding Semnastek.
-
Muslihudin, M., Renvillia, W., Taufiq, T., Andoyo, A. and Susanto, F., 2018. Implementasi Aplikasi Rumah Pintar Berbasis Android Dengan Arduino Microcontroller. Jurnal Keteknikan dan Sains (JUTEKS), 1(1), pp.23-31.
-
Dahlan, B.B., 2017. Sistem Kontrol Penerangan Menggunakan Arduino Uno Pada Universitas Ichsan Gorontalo. ILKOM Jurnal Ilmiah, 9(3), pp.282-289.
-
Ramadhan, A.S. and Handoko, L.B., 2016. Rancang bangun sistem keamanan rumah berbasis arduino mega 2560. Techno. com, 15(2), pp.117-124.
-
Ichwan, M., Husada, M.G. and Rasyid, M.I.A., 2013. Pembangunan prototipe sistem pengendalian peralatan listrik pada platform android. Jurnal informatika, 4(1), pp.13-25.
-
Dharma, I.P.L., Tansa, S. and Nasibu, I.Z., 2019. Perancangan Alat Pengendali Pintu Air Sawah Otomatis dengan SIM800l Berbasis Mikrokontroler Arduino Uno. Jurnal Teknik, 17(1), pp.40-56.
-
Louis, L., 2016. working principle of Arduino and u sing it. International Journal of Control, Automation, Communication and Systems (IJCACS), 1(2), pp.21-29.
-
Lubis, Z., Saputra, L.A., Winata, H.N., Annisa, S., Muhazzir, A. and Wahyuni, M.S., 2019. Kontrol Mesin Air Otomatis Berbasis Arduino Dengan Smartphone. Buletin Utama Teknik, 14(3), pp.155-159.
-
Hardianto, R. and Kusuma, C., 2019. Rancang Bangun Smart Lamp Menggunakan Micro Controller Arduino UNO. ZONAsi: Jurnal Sistem Informasi, 1(1), pp.28-37.
-
Nataliana, D., Syamsu, I. and Giantara, G., 2014. Sistem Monitoring Parkir Mobil menggunakan Sensor Infrared berbasis RASPBERRY PI. ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, 2(1), p.68.
-
Saghoa, Y.C., Sompie, S.R. and Tulung, N.M., 2018. Kotak Penyimpanan Uang Berbasis Mikrokontroler Arduino Uno. Jurnal Teknik Elektro dan Komputer, 7(2), pp.167-174.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.