Media Informasi Animasi 4 Dimensi Halte Transportasi Publik untuk Kenyamanan Masyarakat menggunakan Teknik Motion Planner
DOI:
https://doi.org/10.35870/jtik.v5i4.236Keywords:
Animation 4D, Animation 3D, Public TransportAbstract
As we know, there are a lot of public transportation users, especially buses, which are often used in almost all cities around the world. What is our focus this time is bus stops, many of which are abused from their initial function as a place to pick up and drop off passengers, and are very unfit for use. Therefore, a 4D animation information media for public transportation stops was created. This is done to show the public about the convenience of public transportation stops. This utilization also aims to make the bus stop facilities even better and more comfortable according to the needs of prospective passengers. The concept used in this design is "Livability", a word that refers to a good environment for a community to live in. The design results presented in the interior of this waiting facility are to make public transportation users feel safe and comfortable so that people can interact well with each other while waiting for public transportation.
Downloads
References
Basuki, K.H., 2006. Evaluasi Fungsi Halte Sebagai Tempat Henti Angkutan Umum Studi Kasus Rute Terboyo-Pudakpayung, Semarang. Media Komunikasi Teknik Sipil, 14(3), pp.287-296.
Lesmana, L.W., 2015. Perancangan Interior Fasilitas Tunggu Transportasi Umum di Surabaya. Intra, 3(2), pp.196-207.
Sari, P.A. and Mudakir, Y.B., 2015. Preferensi Masyarakat Terhadap Kemungkinan Pemilihan Moda Bus Rapid Transit (Brt) Trans Semarang Dan Angkutan Umum Lainnya Trayek Terboyo–Sisemut (Doctoral dissertation, Fakultas Ekonomika dan Bisnis).
Supriyadi, S., 2018. Interaksi Objek Animasi 3d Berbasis Multimedia. Jurnal Khatulistiwa Informatika, 6(1).
Putra, M.A.T., Dengen, N. and Syakir, A., 2017. Iklan Layanan Masyarakat tentang Bahaya Banjir berbasis Multimedia Animasi Motion Graphic. In Prosiding Seminar Ilmu Komputer dan Teknologi Informasi (Vol. 2, No. 1).
Sutrisno, L.B., 2016. Pengembangan Media Pembelajaran Berbasis Multimedia Interaktif Pada Mata Kuliah Animasi 1 Bahasan Motion Graphic Jurusan Desain Komunikasi Visual (DIII) UNDIKSHA. PRASI, 11(02).
Purwanti, R. and Natanael, R., 2016. Video Animasi Stop Motion Sebagai Media Pembelajaran Pada Kampanye Pengenalan Tertib Berlalu Lintas Bagi Remaja Pengendara Sepeda Motor. WIDYAKALA: Journal of Pembangunan Jaya University, 3, pp.1-8.
Azmi, F. and Setyadi, D.I., 2019. Perancangan Motion Graphic Sebagai Upaya Pengenalan Profesi Bidang Teknologi Maritim FTK ITS Untuk Siswa SMA. Jurnal Sains dan Seni ITS, 7(2), pp.124-129.
Lazimi Syahirul, Budiardjo hardman, Dewanto Rahmaningtyas, J. T., 2016. Pembuatan Film Pendek Animasi 3D Apel. repository. Universitas Gajah Mada.
Aslah, T.Y. and Wowor, H.F., 2017. Perancangan Animasi 3D Objek Wisata Museum Budaya Watu Pinawetengan. Jurnal Teknik Informatika, 11(1).
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.
