Detektor Kondisi Tingkat Kelembaban Tanah pada Tanaman Hias Menggunakan Nodemcu Esp8266 Berbasis IoT
DOI:
https://doi.org/10.35870/jtik.v6i2.423Keywords:
IoT, NodeMcu ESP8266, Teknology, TelegramAbstract
Technological developments in the era of Globalization, are widely used in various fields, one of the developing technologies is the technology on the NodeMcu ESP8266. In the Soil moisture Detector System in Ornamental Plants Using the IoT-Based NodeMcu ESP8266, based on the problem factors that exist in a failure in plant growth, it is very influential in terms of technique and also improper plant watering procedures, can cause plant growth to be disrupted and also withered. To overcome this problem, the author designed a Moisture Condition Detector in Ornamental Plants Using an IoT-Based NodeMcu ESP8266. Where this system can run commands to automatically water plants from soil moisture while simultaneously watering manually with various desired conditions and the system can send notifications that users can receive via telegram. Through the Moisture Level Condition Detector system in this ornamental plant, it can increase the level of effectiveness, so the quality that the plants get will be better maintained.Downloads
References
Yahwe, C.P., Isnawaty, I. and Aksara, L.F., 2016. Rancang Bangun Prototype System Monitoring Kelembaban Tanah melalui Sms Berdasarkan Hasil Penyiraman Tanaman “studi kasus tanaman Cabai dan Tomatâ€. semanTIK, 2(1).
Rahman, A., 2018. Penyiraman Tanaman Secara Otomatis Menggunakan Propeler berbasis IoT. ITEJ (Information Technology Engineering Journals), 3(2), pp.20-27.
Hamoodi, S.A., Hamoodi, A.N. and Haydar, G.M., 2020. Automated irrigation system based on soil moisture using arduino board. Bulletin of Electrical Engineering and Informatics, 9(3), pp.870-876.
Ojha, M., Mohite, S., Kathole, S. and Tarware, D., 2016. Microcontroller based automatic plant watering system. International Journal of Computer Science and Engineering, 5(3), pp.25-36.
M. Abdullah., 2018. Otomatis Berdasarkan Real Time Clock Dan Tingkat Kelembaban Tanah Berbasis Mikrokontroler the Provision of Nutrients and Automatic Watering Plant Based on Real Time Clock and Soil Humidity Based Microcontroller Atmega32, Ilmu Fis. dan Teknol., vol. 2 (2), pp. 33–41.
Tullah, R., Sutarman, S. and Setyawan, A.H., 2019. Sistem Penyiraman Tanaman Otomatis Berbasis Mikrokontroler Arduino Uno Pada Toko Tanaman Hias Yopi. Jurnal Sisfotek Global, 9(1).
Ferrarezi, R.S., Dove, S.K. and van Iersel, M.W., 2015. An automated system for monitoring soil moisture and controlling irrigation using low-cost open-source microcontrollers. HortTechnology, 25(1), pp.110-118.
Vagulabranan, R., Karthikeyan, M. and Sasikala, V., 2016. Automatic irrigation system on sensing soil moisture content. International Research Journal of Engineering and Technology (IRJET), 3(03), pp.206-208.
Kurnia, D. and Suprianto, A.A., 2016. Rancang Bangun Prototipe Gardening Smart System (GSS) Untuk Perawatan Tanaman Anggrek Berbasis Web. Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, 7(1), pp.191-198.
Prasojo, I., Maseleno, A. and Shahu, N., 2020. Design of automatic watering system based on Arduino. Journal of Robotics and Control (JRC), 1(2), pp.59-63.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.
