Published: 2024-01-01
Rancang Bangun Alat Pengendali Suhu pada Proses Pasteurisasi Susu Murni Menggunakan Arduino Berbasis IoT
DOI: 10.35870/jtik.v8i1.1381
Nova Faulana, Zuly Budiarso
-
Nova Faulana:
Universitas Stikubank
-
Zuly Budiarso:
Universitas Stikubank
Abstract
This research aims to design and develop a temperature control device for the pasteurization process of pure milk using Arduino based on the Internet of Things (IoT). The device is designed to monitor and regulate the temperature automatically during the pasteurization process to ensure its quality and safety. Arduino, as the main platform, is used to collect temperature data through temperature sensors that are directly connected to the system. The temperature data is then sent to a server through the internet network for real-time processing and monitoring. Intelligent temperature control algorithms are implemented in Arduino to adjust heating or cooling during the pasteurization process according to the set temperature point. The results of this research are expected to provide an efficient and accurate solution for temperature control in the pasteurization process of pure milk, as well as improve the overall safety and quality of dairy products.
Keywords
Temperature Control; Pasteurization; Pure Milk; Arduino; Internet of Things (IoT); Blynk; ESP8266
Article Information
This article has been peer-reviewed and published in the Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi). The content is available under the terms of the Creative Commons Attribution 4.0 International License.
-
Issue: Vol. 8 No. 1 (2024)
-
Section: Computer & Communication Science
-
Published: 2024-01-01
-
License: CC BY 4.0
-
Copyright: © 2024 Authors
-
DOI: 10.35870/jtik.v8i1.1381
AI Research Hub
This article is indexed and available through various AI-powered research tools and citation platforms. Our AI Research Hub ensures that scholarly work is discoverable, accessible, and easily integrated into the global research ecosystem.
Nova Faulana, Universitas Stikubank
Program Studi Teknik Informatika, Fakultas Teknologi Informasi dan Industri, Universitas Stikubank, Kota Semarang, Provinsi Jawa Tengah, Indonesia
Zuly Budiarso, Universitas Stikubank
Program Studi Teknik Informatika, Fakultas Teknologi Informasi dan Industri, Universitas Stikubank, Kota Semarang, Provinsi Jawa Tengah, Indonesia
-
Prasetyo, M.S., 2020. Analisa heat transfer alat pasteurisasi susu. Jurnal Mesin Nusantara, 3(1), pp.1-8. DOI: https://doi.org/10.29407/jmn.v3i1.14217
-
Pratama, R.A. and Permana, I., 2021. Simulasi Permodelan Menggunakan Sensor Suhu Berbasis Arduino. Edu Elektrika Journal, 10(1), pp.7-12. DOI: https://doi.org/10.15294/eej.v10i1.47112.
-
Indriyanto, S., Syifa, F.T. and Permana, H.A., 2020. Sistem Monitoring Suhu Air pada Kolam Benih Ikan Koi Berbasis Internet of Things. TELKA-Jurnal Telekomunikasi, Elektronika, Komputasi dan Kontrol, 6(1), pp.10-19. DOI: https://doi.org/10.15575/telka.v6n1.10-19.
-
Simanjuntak, D.B., Widodo, B., Susilo, S. and Nempung, J.I., 2021. Sistem Pengendalian Suhu Dan Kelembaban Pada Bilik Disinfektan Berbasis Blynk Dengan Menggunakan Nodemcu ESP8266. Lektrokom: Jurnal Ilmiah Teknik Elektro, 4(1), pp.8-8. DOI: https://doi.org/10.33541/lektrokom.v4i1.3388.
-
Hidayat, D. and Sari, I., 2021. Monitoring suhu dan kelembaban berbasis Internet of Things (IoT). Jurnal Teknologi dan Ilmu Komputer Prima (JUTIKOMP), 4(1), pp.525-530. DOI: https://doi.org/10.34012/jutikomp.v4i1.1676
-
Ikhsan, R.N. and Syafitri, N., 2021. Pemanfaatan Sensor Suhu DS18B20 sebagai Penstabil Suhu Air Budidaya Ikan Hias. In Seminar Nasional Energi, Telekomunikasi dan Otomasi (SNETO) (pp. 18-26).
-
Fathulrohman, Y.N.I. and Saepulloh, A., 2019. Alat Monitoring suhu dan kelembaban menggunakan arduino uno. Jurnal Manajemen dan Teknik Informatika (JUMANTAKA), 2(1).
-
Indriyanto, S., Yuliantoro, P. and Kusumawati, D., 2022. Sistem Monitoring Suhu Air Pada Aquascape Berbasis Internet of Things (IoT). (Journal of Telecommunication, Electronics, and Control Engineering (JTECE)), 4(1), pp.56-65. DOI: https://doi.org/10.20895/jtece.v4i1.608
-
Gunawan, I., Akbar, T. and Ilham, M.G., 2020. Prototipe penerapan Internet Of Things (Iot) pada monitoring level air tandon menggunakan nodemcu Esp8266 dan Blynk. Infotek J. Inform. dan Teknol, 3(1), pp.1-7.
-
Azzaky, N. and Widiantoro, A., 2020. Alat penyiram tanaman otomatis berbasis arduino menggunakan internet of things (IOT). J-Eltrik, 2(2), pp.48-48. DOI: https://doi.org/10.30649/j-eltrik.v2i2.48
-
Zakariya, M.F., 2022. Monitoring Dan Kontrol Kondisi Air Kolam Ikan Menggunakan Blynk Berbasis Iot. Journal of System and Computer Engineering (JSCE), 3(1), pp.196-205. DOI: https://doi.org/10.47650/jsce.v2i2.348.
-
Fakhrurrozi, A., 2023. Monitoring kualitas air tambak ikan bandeng menggunakan aplikasi Blynk berbasis IoT (Doctoral dissertation, Universitas Islam Negeri Maulana Malik Ibrahim).
-
Silalahi, F.D. and Dian, J., 2021. Implementasi internet of things (IoT) dalam monitoring suhu dan kelembaban ruang produksi obat non steril menggunakan Arduino berbasis web. JUPITER: Jurnal Penelitian Ilmu dan Teknologi Komputer, 13(2), pp.62-68. DOI: https://doi.org/10.5281/3662.jupiter.2021.10
-
Surya, A. and Mukhaiyar, R., 2023. Alat Pengatur Suhu Otomatis pada Kompor Gas Berbasis Internet of Things (IoT) dan Sensor Suhu Menggunakan Mikrokontroler Arduino. JTEIN: Jurnal Teknik Elektro Indonesia, 4(1). DOI: https://doi.org/10.24036/jtein.v4i1.394
-
Pradhana, C. and Machfuroh, T., 2020. Monitoring Pembakaran Suhu Batu Bata Konvensional Berbasis Mikrokontroler Arduino Dan IOT (Internet of Things). JUPITER (Jurnal Pendidikan Teknik Elektro), 5(2), pp.1-8. DOI: http://doi.org/10.25273/jupiter.v5i2.7556.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.