Rancang Bangun Sistem Kendali Suhu Pada Gudang Penyimpanan Ikan Menggunakan Arduino Berbasis IoT
DOI:
https://doi.org/10.35870/jtik.v8i1.1374Keywords:
Temperature Control System, Arduino, IoT, Fish Storage Warehouse, Wi-Fi Module, Relay ModuleAbstract
This research aims to design and build a temperature control system in a fish storage warehouse using Arduino and the Internet of Things (IoT). Arduino was chosen because of its ability to control temperature and ease of programming. This system is connected to the internet via IoT, which allows users to monitor and control warehouse temperatures remotely via mobile devices or computers. This research involves designing and implementing an electronic circuit consisting of a temperature sensor, Wi-Fi module, and relay module to control cooling devices in a warehouse. In addition, a web-based application was also developed to monitor and control warehouse temperature remotely. The test results show that the developed temperature control system functions well and meets the user's needs in maintaining the warehouse temperature within the desired range. With this system, it is hoped that temperature control in fish storage warehouses will become more efficient and can improve the quality and safety of stored fish
Downloads
References
Al-Mutairi, A.W. and Al-Aubidy, K.M., 2023. IoT-based smart monitoring and management system for fish farming. Bulletin of Electrical Engineering and Informatics, 12(3), pp.1435-1446. DOI: https://doi.org/10.11591/eei.v12i3.3365
Syas, I.Y. and Rakhmadi, F.A., 2019. Prototipe Sistem Monitoring Serta Kendali Suhu Dan Kelembapan Ruangan Budidaya Jamur Tiram Putih Menggunakan Sensor Dht22 Dan Mikrokontroler Nodemcu. Sunan Kalijaga Journal of Physics, 1(1), pp.7-13.
Hakiki, M.I., Darusalam, U. and Nathasia, N.D., 2020. Konfigurasi Arduino IDE Untuk Monitoring Pendeteksi Suhu dan Kelembapan Pada Ruang Data Center Menggunakan Sensor DHT11. Jurnal Media Informatika Budidarma, 4(1), pp.150-156. DOI: https://doi.org/10.30865/mib.v4i1.1876
Hakim, A.R., Bramanto, A. and Syahri, R., 2010. Aplikasi Monitoring Suhu Ruangan Berbasis Komputer dan SMS Gateway. Jurnal Informatika Mulawarman, 5(3), pp.32-38.
Iksan, N., Hidayati, L., Andrasto, T. and Fathoni, K., 2022. Sistem kendali suhu dan kelembapan pada alat penetas telur berbasis Fuzzy Logic Controller. JEPIN (Jurnal Edukasi dan Penelitian Informatika), 8(2), pp.245-254. DOI: http://dx.doi.org/10.26418/jp.v8i2.53246.
Yolnasdi, Y., Arviansyah, A., Irfan, D. and Ambiyar, A., 2020. Rancang Bangun Pengontrol Suhu Ruangan Berbasis Mikrokontroler Arduino Uno. INTECOMS: Journal of Information Technology and Computer Science, 3(2), pp.218-226. DOI: https://doi.org/10.31539/intecoms.v3i2.1730.
Islam, H.I., Nabilah, N., Atsaurry, S.S.I., Saputra, D.H., Pradipta, G.M., Kurniawan, A., Syafutra, H., Irmansyah, I. and Irzaman, I., 2016, October. Sistem kendali suhu dan pemantauan kelembaban udara ruangan berbasis arduino uno dengan menggunakan sensor dht22 dan passive infrared (pir). In Prosiding Seminar Nasional Fisika (E-Journal) (Vol. 5, pp. SNF2016-CIP). DOI: https://doi.org/10.21009/0305020123.
Khairat, U., Basri, B. and Fakhrurrozi, W.A., 2022. Monitoring Suhu Ruang Budidaya Jamur Tiram Menggunakan Android Berbasis Arduino. Technomedia Journal, 7(1 Juni), pp.1-10. DOI: https://doi.org/10.33050/tmj.v7i1.1762
Najmurrokhman, A., Kusnandar, K. and Amrulloh, A., 2018. Prototipe Pengendali Suhu dan Kelembaban untuk Cold Storage menggunakan Mikrokontroler Arduino ATMEGA328 dan Sensor DHT11. Jurnal Teknologi, 10(1), pp.73-82. DOI: https://doi.org/10.24853/jurtek.10.1.73-82
Najmurrokhman, A., Kusnandar, K. and Amrulloh, A., 2018. Prototipe Pengendali Suhu dan Kelembaban untuk Cold Storage menggunakan Mikrokontroler Arduino ATMEGA328 dan Sensor DHT11. Jurnal Teknologi, 10(1), pp.73-82. DOI: https://doi.org/10.24853/jurtek.10.1.73-82
Yunas, R.P. and Pulungan, A.B., 2020. Sistem Kendali Suhu dan Kelembaban pada Proses Fermentasi Tempe. JTEV (Jurnal Teknik Elektro dan Vokasional), 6(1), pp.103-113. DOI : https://doi.org/10.24036/jtev.v6i1.106943.
Siregar, M.R., Bintoro, A. and Putri, R., 2021. Sistem Monitoring Suhu dan Kelembaban pada Penyimpanan Gabah untuk Menjaga Kualitas Beras Berbasis Internet of Things (IoT). Jurnal Energi Elektrik, 10(1). DOI: https://doi.org/10.29103/jee.v10i1.4309
Sumardiono, A. and Siswanto, A., 2017. Kontrol Kestabilan Suhu Ruangan Menggunakan Sensor DS18DB20 Berbasis Mikrokontroler ATMEGA 328. SYNTAX Jurnal Informatika, 6(1), pp.30-36.
Syukhron, I., 2021. Penggunaan Aplikasi Blynk untuk Sistem Monitoring dan Kontrol Jarak Jauh pada Sistem Kompos Pintar berbasis IoT. Electrician: Jurnal Rekayasa Dan Teknologi Elektro, 15(1), pp.1-11.
Usuman, I. and Aardhi, H., 2010. Sistem Pendeteksi Suhu Dan Asap Pada Ruangan Tertutup Memanfaatkan Sensor Lm35 Dan Sensor Af30. Berkala Fisika, 13(2), pp.1-6.
Budi, D.W.K., Hartati, R.S. and Arjana, I.G.D., 2022. Rancang Bangun Sistem Monitoring Suhu Cold Storage Berbasis IoT Menggunakan Wemos D1 R2 Di Pt. Aerofood Acs Denpasar. Jurnal SPEKTRUM Vol, 9(4).
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Fajar Yulian Perdana, Zuly Budiarso
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.
