Perancangan Sistem Detektor Suhu Fermentasi Acetobacter Xylinum menggunakan Sensor DS18B20
DOI:
https://doi.org/10.35870/jtik.v2i1.44Keywords:
acetobacter xylinum, arduino uno, temperature sensorsAbstract
Detection system temperature needed in the process of fermentation Acetobacter xylinum. Many food products produced from of fermentation this bacteria. Acetobacter xylinum need temperature fermentation between 28oC-32oCto growing good. To able for controlling temperature on fermentation Acetobacter xylinum, made a temperature design controller using Arduino Uno microcontroller and gauges the temperature of DS18B20 sensors. Election DS18B20 sensors because it had higher at 0,5 oC accuracy. The research covered structural testing component, testing functional and validation component. Data is the decimal form of signals delivered by a temperature on Arduino Uno microcontroller as the brain and processors. From test validation obtained prosesntase error for resistance (R) DS18B20 sensors for temperature 0oC-100oC of 0,96%. The testing Resistance (R) DS18B20 sensors for temperature 25oC-35oC of 1,12%. The measurement of temperature 25oC-35oC before calibration have prosentase error 9,65% and after calibration 0,70%. The prosentase error is still in a normal limits instrument temperature controller, so this instrument can be used as a control in the process of fermentation acetobacter xylinum.
Downloads
References
Arissandi, R., 2014, Implementasi Kontrol Logika Fuzzy Sebagai Pengendali Suhu Sistem Pasteurisasi Kuning Telur Cair Berbasis Mikrokontroler Arduino, Skripsi, Universitas Brawijaya, Malang.
Astria, F., Fanny, 2014, Rancang bangun Alat Ukur pH dan Suhu Berbasis Short Message Service (SMS), Jurnal Mektrik, 1(1), pp. 48-55.
Darmawan, D., Katriani, L., Setiawan, A., 2013, Rancang Bangun Prototype Sistem Kontrol Temperatur Menggunakan Sensor DS18B20 pada Inkubator, Jurnal Elektronika, 2(1), pp. 23-28.
Dewantoro, G., Hartini, S., Hary, A., 2015, Alat Optimasi Suhu dan Kelembaban Untuk Inkubasi Fermentasi dan Pengeringan Pasca Fermentasi, Jurnal Rekayasa Elektrika, 11(3), pp. 1-6.
Dwi, N., Winardi, S., 2015, Pendeteksi Susu Basi dengan Sensor pH dan Sensor Suhu Berbasis Mikrokontroler, e-Jurnal Spirit Pro Patria, 1(1), pp. 47-53.
Harianingsih, Harliyanto, C., 2016, Pemanfaatan Sagu Sebagai Bahan Pembawa (Carrier) Pada Kristalisasi Acetobacter Xylinum, Jurnal Inovasi Teknik Kimia, 1(1), pp. 35-38.
Harianingsih, Maharani, F., Kusumaningrum, M., Permberdayaan Ibu Rumah Tangga Melalui Pelatihan Pembuatan Nata de Leri di Kelurahan Banyumanik Semarang, Jurnal Abdimas, 1(1), pp. 13-17.
Kurniawan, I., Defi, R., 2013, Alat Pemantau Kestabilan Pasteurisasi Susu, Jurnal Teknik Elektro, 5(2), pp. 69-74.
Roby, A., 2014, Rancang Bangun Simulator Sistem Pengendalian Suhu Pada Dinding Bioreaktor An aerob Berbasis Komputer Personal, Skripsi, Institut Teknologi Surabaya.
Suarsono, Wijandi, 2003, Produksi Nata de Coco, LIPI, pp. 24-30.
Downloads
Published
Issue
Section
License
Copyright (c) 2018 Jurnal JTIK (Jurnal Teknologi Informasi dan Komunikasi)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Copyright Retention and Open Access License
Authors retain copyright of their work and grant the journal non-exclusive right of first publication under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
This license allows unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
2. Rights Granted Under CC BY 4.0
Under this license, readers are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, including commercial use
- No additional restrictions — the licensor cannot revoke these freedoms as long as license terms are followed
3. Attribution Requirements
All uses must include:
- Proper citation of the original work
- Link to the Creative Commons license
- Indication if changes were made to the original work
- No suggestion that the licensor endorses the user or their use
4. Additional Distribution Rights
Authors may:
- Deposit the published version in institutional repositories
- Share through academic social networks
- Include in books, monographs, or other publications
- Post on personal or institutional websites
Requirement: All additional distributions must maintain the CC BY 4.0 license and proper attribution.
5. Self-Archiving and Pre-Print Sharing
Authors are encouraged to:
- Share pre-prints and post-prints online
- Deposit in subject-specific repositories (e.g., arXiv, bioRxiv)
- Engage in scholarly communication throughout the publication process
6. Open Access Commitment
This journal provides immediate open access to all content, supporting the global exchange of knowledge without financial, legal, or technical barriers.
